Asetek

Asetek was founded by André Eriksen in 1997. A year into its existence, Asetek's network of VapoChill re-sellers grew to over 35. In 2000, Asetek received an award from the Danish Ministry of Trade and Industry for being Denmark's most innovative company that year. The company was officially incorporated in the same year. In 2001 Asetek released the first 2 GHz personal computer and started a business partnership with Asus. In 2002, the new generation of VapoChill was released. In 2003, Asetek released the WaterChill brand of liquid coolers. In 2005, they released the first 12-volt pump system.

Gen 1/2

In 2007, Asetek announced its first OEM design to be used by HPs Blackbird Gaming PC. In 2008 Acer used Asetek to cool its new Predator Gaming PCs. In 2009, Dell made liquid cooling a standard feature on its Alienware computers.

Gen 3

The gen 3 pump was released in 2010. It offered a reduced size when compared to their gen 2 but without compromising performance. The reduced height aimed to facilitate the cooling of GPUs such as the GTX 580 from PNY Technologies. These pumps are used by Corsair, PNY and Antec. They can be identified by the exposed motor portion on the cap.

Gen 4

The gen 4 pump platform was released in 2012. It brought advances in the liquid flow and thermal performance compared to gen 3. The exposed section of the motor was removed from the top of the pump. It was the most-used platform in the company's history, being used by Corsair, NZXT, Thermaltake, Dell, HP, Intel and other companies.

Gen 5

The gen 5 pump was released in 2015. It offered reduced noise and increased thermal performance. It achieved this through material and chamber optimizations. Gen 5 also brought a more efficient motor. The side inlets/outlets of the previous generations were replaced with a vertical inlet and outlet.

Gen 6

First revealed at Computex by Corsair in 2017 and released in 2018 by Corsair with the release of the H150i and the H115i. As of yet Asus, Corsair and Gigabyte have released gen 6 Asetek pumps. Gen 6 pumps go back to the side-mounted inlet and outlet like gen 4 pumps. They also have a smaller cold-plate, the first change to the cold-plate in years.