Dover

Dover Corporation provides equipment and components, consumable supplies, aftermarket parts, software and digital solutions, and support services worldwide. The Engineered Products segment provides various equipment, component, software, solution, and services that are used in aftermarket vehicle service, solid waste handling, industrial automation, aerospace and defense, industrial winch and hoist, and fluid dispensing end-market. This segment also offers manual and power clamp, rotary and linear mechanical indexer, conveyor, pick and place unit, glove port, and manipulator, as well as end-of-arm robotic gripper, slide, and end effector. Its Clean Energy & Fueling segment offers component, equipment, and software and service solution enabling safe transport of traditional and clean fuel, and other hazardous substance along with supply chain, as well as operation of convenience retail, retail fueling, and vehicle wash establishment. The Imaging and Identification segment provides precision marking and coding; packaging intelligence; product traceability equipment; brand protection; and digital textile printing equipment, as well as related consumable, software, and service to packaged and consumer good, pharmaceutical, industrial manufacturing, fashion and apparel, and other end-market. Its Pumps and Process Solutions segment manufactures specialty pump, connector, and flow meter, fluid connecting solution, plastics and polymer processing equipment, and engineered components for rotating and reciprocating machines. The Climate & Sustainability Technologies segment manufactures refrigeration system, refrigeration display case, commercial glass refrigerator and freezer door, and brazed plate heat exchanger for industrial heating and cooling, and residential climate control applications. It sells its products directly and through a network of distributors. The company was incorporated in 1947 and is headquartered in Downers Grove, Illinois.

Founding

In the 1930s and 1940s, George Ohrstrom Sr., a New York City stockbroker, bought four manufacturing companies: C. Lee Cook Company , Rotary Lift , C. Norris , and Peerless . Dover Corporation was incorporated in 1947, and in 1955, Ohrstrom brought in the former owner and president of C. Lee Cook Company, Fred D. Durham, to manage his four companies. Later that same year, the Dover Corporate offices opened in Washington, D.C., and Dover Corporation went public on the New York Stock Exchange. As such, the year 1955 marks the company's official founding.Fred Durham influenced Dover's corporate culture, emphasizing autonomy, decentralization, and few corporate staff members. As a result, divisions were run in an independent fashion, each with its own president. Today, Dover is still known for its decentralized management structure, in its governance of operating companies, and for its acquisitive approach.

Between 1955 and 1979, Dover acquired fourteen companies. A great deal of this acquisition activity served to build the Dover Elevator business. This elevator growth began in 1955, as Dover Elevator split from Rotary Lift and became an independent operating company within Dover. Dover's purchase of the Shepard Warner Elevator Company in 1958 marked the beginning of an effort to grow the elevator business. In 1963, Dover acquired Acme Elevator, and then Elevator Service, Reddy Elevator Company in 1964, and Hunter-Hayes Elevator Company in 1970. With these purchases, Dover soon became the third largest elevator company in the U.S. and remained so for many years. Dover continued to expand its elevator division throughout the 1960s and 1970s with the purchases of Moody & Rowe, Burch, Turnbull, Burlington, Hammond & Champness, Louisiana Elevator, and W.W. Moore. Ultimately, Dover sold its elevator division in 1999 to Thyssen AG for $1.1 billion. Dover Elevator had a pretax operating profit of $93 million in 1997 and the sale was mutually beneficial: it allowed Dover to focus on building its other businesses and moved ThyssenKrupp Elevator Americas to the number three spot worldwide in the elevator and escalator industry.

Acquisitions

Dover's acquisition history reaches beyond the elevator industry. With a focus on diversification in the 1960s, such as the acquisition of Ohio Pattern Works & Foundry Company in 1961, came notable purchases of companies that continue to be a significant part of Dover Corporation today. The company was shorthanded to OPW, and in 1949 one of its engineers, Leonard H. Duerr, invented the automatic shutoff fuel-dispensing nozzle valve. Today, the basic technology of Duerr's invention continues to exist in automatic shutoff nozzles, and OPW is still a part of Dover, specializing in the design and manufacture of commercial and retail-fueling. In 1962, Dover made two notable acquisitions: Detroit Stamping Company, now DE-STA-CO, specializing in the design and manufacturing of clamping, gripping, transferring, and robotic tooling; and Alberta Oil Tool, subsequently part of Dover Artificial Lift before its separation from Dover Corp. Today, Alberta Oil Tool produces specialty drive rods, Norris tubular fittings, Norriseal control valves, and other products.1964 marked a significant year, as OPW's former leader Thomas Sutton became president of Dover and corporate headquarters were relocated to New York City. The 1970s were characterized by Dover's intent to expand beyond its principle industries of building materials, equipment, and industrial components. A result of this effort included the acquisition of Dieterich Standard, which manufactured liquid-measurement instruments and whose president, Gary Roubos, went on to become Dover's chief operating officer and president in 1977. Later, Roubos became Dover's chief executive officer in 1981.Another significant acquisition included Sargent Industries, a manufacturer of control devices for aerospace and industrial end-markets, purchased in 1984 for $68 million. The Sargent Aerospace & Defense unit persisted as a global supplier of precision-engineered components and aftermarket services, performing critical functions on a variety of commercial and military aircraft, submarines, and land-based vehicles.In the 1980s, Dover also began to focus more on electronics. This period was marked by the acquisitions of K&L Microwave in 1983, Dielectric Laboratories in 1985, and NURAD in 1986. Dover later chose to spin off DOVatron in 1993 to shareholders, as the company specialized in circuit-board assembly and had become a source of competition for Dover customers.That same year, Dover acquired Phoenix Refrigeration Systems, which then acquired Hill Refrigeration in 1994 to form Hillphoenix. Hillphoenix now manufactures commercial refrigeration systems and mechanical centers, electrical distribution products, walk-in coolers and freezers, and specialty display cases and fixtures. The company is a partner of the EPA's GreenChill initiative, which focuses on reducing refrigerant emissions and climate-change impact. Hillphoenix has more equipment installed at GreenChill Certified retail stores than any other refrigeration manufacturer.Also in 1994, Dover's COO and President, Thomas Reece, became CEO of the company. The following year, Dover purchased an 88 percent interest in the French company Imaje Printing Products for $200 million; this acquisition marks the largest in Dover's corporate history. In 2006, Dover acquired Markem Corporation which specializes in identification. In 2007, the companies merged and were renamed Markem-Imaje, and have since focused on product coding, labeling, traceability, and identification.

2000s

While Dover acquired more than seventy companies between 1998 and 2002, the company's acquisition rate slowed in the early 2000s. Dover sold eight companies in 2001 for a total of $400 million. The early 2000s also marked a leadership change: Ronald Hoffman, Dover's vice president, and former president and CEO of Dover Resources, become president and COO of Dover Corporation in 2003. In 2005, he was appointed to the position of CEO. The financial crisis hit Dover hard, but the company recovered quickly.Dover focused on growing target areas from 2007 to 2009, including electronic communication, energy and fluids, product identification, and refrigeration. Dover continued to grow its refrigeration business with the 2012 purchase of Anthony International for $602.5 million. Anthony designs and manufactures specialty glass, commercial-glass refrigeration and freezer doors, lighting systems, and display equipment.In 2008, Robert Livingston was appointed Dover's new CEO and president. Livingston's Dover career began twenty-nine years earlier with the acquisition of K&L Microwave, where he was a vice president. After joining Dover, Livingston also served as COO and vice president of Dover Corporation, president and CEO of Dover Engineered Systems, and president and CEO of Dover Electronics. Under Livingston's leadership, Dover moved its corporate headquarters from New York City to the Chicago area in 2010. Factors at play in this decision included Chicago's central location, wide variety of housing options for employees, quality of life, and nearby air service to national and global destinations. The choice to move to Downers Grove, Illinois, was also partially impacted by an effort to consolidate operations, and reduce administration costs, as the move brought all four segment headquarters under one roof.From 2008 to 2012, Dover acquired almost twenty-five companies. Livingston's corporate development strategy sought to strengthen promising businesses and divest those that were either growing slowly or had significant exposure to highly volatile industries. As a result, Dover was able to apply greater focus to growing four or five targeted end-markets. Livingston also worked to reduced expenses by consolidating back office operations, metal purchases, and freight transportation. Inpro/Seal, a producer of bearing isolators, was purchased by Waukesha Bearings Corporation in 2009, which included 150,991 shares of Dover's common stock being issued to Inpro/Seal shareholders. In 2010, KMC Inc. and Bearings Plus Inc. were acquired by Waukesha Bearings Corporation with the expectation of synergizing their bearing seal technologies with Dover. In addition, between 2008 and 2010, Dover spent approximately $436 million to purchase a total of sixteen businesses, while only $100 million was earned from the sale of eight businesses.In 2011, Dover expanded its acoustic components business with the purchase of Sound Solutions, a manufacturer of dynamic speakers and receivers for mobile phones and other consumer electronics, for $855 million. Dover had acquired Knowles, a designer and manufacturer of hearing-aid technology and other acoustical componentry, six years earlier for $750 million. Sound Solutions and Knowles gave Dover the necessary scale to develop items for the rapidly evolving mobile-electronics industry. In 2014, Dover spun off Knowles, which had a $2.6 billion market cap post-spin. Today, Knowles continues to be a global supplier of communication-technology components, such as MEMS , microphones, speakers, receivers, transducers, capacitors and oscillators. Dover CEO and president Robert Livingston described the spinoff as allowing both Knowles and Dover to more aggressively pursue their individual growth strategies.In 2015, Dover sold Sargent Aerospace & Defense to RBC Bearings.In May 2018, Richard J. Tobin took over as president and CEO of Dover, after previously serving as the company's director. In May 2018, Dover spun off a large portion of its Energy segment including upstream energy businesses into a standalone publicly traded company, Apergy.

Dover Corporation (Dover) owns and operates a global portfolio of manufacturing companies providing components and equipment, specialty

Dover companies are committed to creating economic value for shareholders and customers through sustainable practices that protect the long term well-being of the environment.